View source for The code to control a stepper motor

https://medium.com/@Keithweaver_/controlling-stepper-motors-using-python-with-a-raspberry-pi-b3fbd482f886

<source lang="python">
import RPi.GPIO as GPIO
import time
 
GPIO.setmode(GPIO.BOARD)
 
control_pins = [7,11,13,15]
 
for pin in control_pins:
  GPIO.setup(pin, GPIO.OUT)
  GPIO.output(pin, 0)
 
halfstep_seq = [
  [1,0,0,0],
  [1,1,0,0],
  [0,1,0,0],
  [0,1,1,0],
  [0,0,1,0],
  [0,0,1,1],
  [0,0,0,1],
  [1,0,0,1]
]
 
for i in range(512):
  for halfstep in range(8):
    for pin in range(4):
      GPIO.output(control_pins[pin], halfstep_seq[halfstep][pin])
    time.sleep(0.001)
 
GPIO.cleanup()
</source>