Difference between revisions of "Netbackup Tape Management"
From MyWiki
| Line 14: | Line 14: | ||
:''vmoprcmd -d ds''<br> | :''vmoprcmd -d ds''<br> | ||
:''vmoprcmd -dp ds''<br> | :''vmoprcmd -dp ds''<br> | ||
| + | '''How many tape drives are in current use'''<br> | ||
| + | ''ssh soter /usr/openv/volmgr/bin/vmoprcmd -dp ds | awk '{ print $4}' | grep Yes | wc -l''<br> | ||
Revision as of 14:01, 25 September 2014
List the tapes in the Load ports, If there is a tape in a port you will see "full=1", if empty "full=0"
- echo "s i q" | tldtest -r /dev/sg/c0tw500104f0009f24d7l0
For interactive menu to move tapes
- tldtest -r /dev/sg/c0tw500104f0009f24d7l0
For example, to move a tape from load port 4 to slot 23
- m p4 s23
To see if there are any tapes in the load ports
- s i q ( there are spaces between each letter )
To list the free slots in the library
- echo "s s" | tldtest -r /dev/sg/c0tw500104f0009f24d7l0 | grep 'contains Cartridge = no'
To update the volume configuration in the library, needs to be done when tapes are loaded or unloaded manually, the accuracy of the information displayed by the "available_media" command depends on the volume configuration being updated.
- vmupdate -rt TLD -rn 0
To show tape drive status
- vmoprcmd -d ds
- vmoprcmd -dp ds
How many tape drives are in current use
ssh soter /usr/openv/volmgr/bin/vmoprcmd -dp ds | awk '{ print $4}' | grep Yes | wc -l
